The XVME-689-VR7 is a powerful, very low power VMEbus PC compatible processor module from Xembedded, the pioneer and leader in VMEbus PC technology.
The XVME-689-VR7 VMEbus processor integrates an Intel® Celeron® M processor running at 1.0GHz with a PCI-to-VMEbus interface.
This VME processor module allows users to take advantage of the low power, multiprocessing capability of the VMEbus while using standard off-the-shelf PC software, operating systems and VMEbus I/O modules. It is a drop in replacement for the VR7 VMEbus processor.
Features
● Same P1 and P2 pin out as the VR7 processor
● Single Slot 6U single board computer
● Intel® Celeron® 1.0GHz processor with up to 512KB of level 2 cache
● 855GME and 6300ESB chipset
● VGA Graphics out front panel or rear video support (Pixel resolution up to 1600 X 1200 at 85Hz)
● 256MB, 512MB, and 1GB of ECC or Non-ECC DDR, 266/333MHz SDRAM
● EIDE Ultra-100 DMA controller supports up to three EIDE devices
● Optional EIDE On-board 1.8” hard drive or optional Compact Flash carrier
● One Serial ATA150 (SATA150) external devices
● Floppy disk interface
● Optional SCSI interface available with rear I/O
● One PMC 32/64-bit 33/66MHz site (IEEE P1386/P1386.1) with front panel I/O bezel and user I/O on optional
P0 rear connector
● PMC expansion for two additional PMC sites using the XVME-976-209
● Headless operation using serial console mode including BIOS setup
● Rear operation using USB keyboard/mouse and rear video options
● VME-64 support with Tundra Universe IID A32/A24/
A16/D64/D32/D16/D8, MBLT64 and fast hardware
byte-swapping
● Parallel Printer Port (ECP, EPP and IEEE1284)
● USB 2.0 Ports, one on front two out rear connector
● Four serial ports
- COM1 RS-232/422/485 on front
- COM2 RS-232 out rear connector
- COM3 RS-232 out rear connector
- COM4 RS-232 out rear connector
● Long duration watchdog timer
● Front panel reset switch and status LEDs
● Audio - line level stereo input and output
● Software support Libraries for Windows NT®, Windows
® 2000, Windows® XP, Windows® XP Embedded,
RTX®, Linux®, QNX® , VxWorks and MS-DOS®
( others available on request)